xTool F1
Our slate machine in Gedern, discontinued and not part of the demo programme.
Stands here, but no demo appointment is booked on it.
No longer available
A good fit when
- You saw a slate engraving in the shop and want to know what made it
- Small parts and jewellery are your focus
- You are weighing up used F1 offers against a current machine
Note It runs in Gedern but is no longer demonstrated. It marks our slate, and you cannot buy one new anyway. Its counterpart in the demo programme is the F2 in the Hirzenhain workshop, where you see the same galvo principle on a machine that still exists.
Key figures
- Laser type
- Diode + infrared
- Power
- 10 W + 2 W
- Optics
- Galvo
What it actually takes up
The dimensions are the manufacturer figures. The clearance next to them is not: that is our own estimate from running these machines — room for workpieces beside it, for hose and cable behind it, and for the lid or your hands above it. That is the number no data sheet carries.
- Machine size
- 17.9 × 23.5 × 33.4 cm
- Footprint in use
- 48 × 34 cm
- Height with clearance above
- 43 cm
- Weight
- 5 kg
- Including extraction
- 0.45 m²
It fits on any counter. The space it needs does not come from the machine but from what sits next to it: blanks, jigs, extraction hose.
Current price in the official xTool shop (de.xtool.com), last checked automatically on 29/09/2026, 08:26, including VAT. Each figure is the base configuration without a bundle; options and accessories change it considerably. Only your personal quote is binding.
From our own workshop
The F1 is discontinued but still working here, with exactly one job: slate coasters. On no other laser have we found settings for slate as good as on this one. That is why the dinosaur has kept its place in the Regionalladen Gedern. We can no longer demonstrate it and you can no longer buy it — but we will gladly tell you which machine takes its place today.
See it
It stands in Gedern, but you cannot book the appointment on it. You can still see it during an appointment for one of the other machines there.
Everything about the Gedern location Back to all machines All photographs from shop and workshop
Read before you buy
From our German knowledge section — these articles are in German only.
Also Fibre, MOPA & infrared
Your material. Your machine. One hour.
The demo costs nothing and ends without a signature. It ends with you knowing which machine fits what you are planning and which one you can skip.
Booking runs through the official xTool demo system, opens in a new tab.