xTool S1
Enclosed diode laser with a large bed.
Not on site — we advise on it, but cannot show it.
from €1,059 RRP €1,068 €9 off
Price applies to: Schwarz / S1 10W / Basic Kit
A good fit when
- You mostly engrave wood, leather and acrylic
- You need area but not yet CO₂ cutting power
- The machine has to be enclosed and shop-friendly
Key figures
- Laser type
- Diode, infrared optional
- Power
- 10 – 40 W
- Work area
- 49.8 × 31.9 cm
What it actually takes up
The dimensions are the manufacturer figures. The clearance next to them is not: that is our own estimate from running these machines — room for workpieces beside it, for hose and cable behind it, and for the lid or your hands above it. That is the number no data sheet carries.
- Machine size
- 76.5 × 56.1 × 18.3 cm
- Footprint in use
- 107 × 76 cm
- Height with the lid open
- 58 cm
- Weight
- 20 kg
- Including extraction
- 1.1 m²
Low built, but wide and deep. The lid needs clear air above it. Fitting the riser base for taller workpieces adds another good 10 cm of height.
Current price in the official xTool shop (de.xtool.com), last checked automatically on 29/09/2026, 08:26, including VAT. Each figure is the base configuration without a bundle; options and accessories change it considerably. Only your personal quote is binding.
See it
We do not have this one on site. We will happily tell you which of the machines that are here comes closest to what you are planning, and whether the difference is worth it.
Read before you buy
- Geschlossene Lasergravierer (Laserklasse 1): Marktübersicht 2026 Geschlossene Klasse-1-Geräte gibt es 2026 ab 219 €. Marktübersicht mit deutschen Preisen von Creality bis xTool, und was den Aufpreis rechtfertigt.
- Welche xTool-Geräte laufen 2026 noch mit LightBurn, und welche nicht? Firmware-Update, gekappte Verbindungen, xTool Studio statt XCS: die Kompatibilitätsübersicht 2026, inklusive der Geräte, die nie LightBurn sprechen.
From our German knowledge section — these articles are in German only.
Also Diode lasers
Your material. Your machine. One hour.
The demo costs nothing and ends without a signature. It ends with you knowing which machine fits what you are planning and which one you can skip.
Booking runs through the official xTool demo system, opens in a new tab.