xTool M2
Engrave and print in colour without moving the workpiece.
Stands here and is shown in person.
from €649
Price applies to: 10W / xTool M2 Standalone
A good fit when
- You want engraving and colour in a single pass
- Space at the point of sale is tight
- You are testing personalisation before committing
Key figures
- Laser type
- Diode, infrared optional
- Power
- 10 – 20 W
- Notable
- Colour print module
What it actually takes up
The dimensions are the manufacturer figures. The clearance next to them is not: that is our own estimate from running these machines — room for workpieces beside it, for hose and cable behind it, and for the lid or your hands above it. That is the number no data sheet carries.
- Machine size
- 61 × 56.9 × 18 cm
- Footprint in use
- 81 × 72 cm
- Height with the lid open
- 53 cm
- Weight
- 12 kg
- Including extraction
- 0.88 m²
Flat enough for an ordinary shelf, but at 61 cm wide it fills a 60 cm deep worktop completely. The lid opens upwards and wants roughly 35 cm of clear air above it, otherwise it jams under the wall unit. Extraction needs its own space and fits under the table in most setups.
Current price in the official xTool shop (de.xtool.com), last checked automatically on 29/09/2026, 08:26, including VAT. Each figure is the base configuration without a bundle; options and accessories change it considerably. Only your personal quote is binding.
From our own workshop
The right machine to start out on. The work area is generous enough that you do not hit a wall immediately, and the optional printing and infrared modules let it grow with you: it later covers jobs you would otherwise buy a second machine for.
See it
It stands in Hirzenhain. An appointment lasts one hour and belongs to this one machine — bring your own material.
Everything about the Hirzenhain location Back to all machines
Read before you buy
- Geschlossene Lasergravierer (Laserklasse 1): Marktübersicht 2026 Geschlossene Klasse-1-Geräte gibt es 2026 ab 219 €. Marktübersicht mit deutschen Preisen von Creality bis xTool, und was den Aufpreis rechtfertigt.
- Welche xTool-Geräte laufen 2026 noch mit LightBurn, und welche nicht? Firmware-Update, gekappte Verbindungen, xTool Studio statt XCS: die Kompatibilitätsübersicht 2026, inklusive der Geräte, die nie LightBurn sprechen.
From our German knowledge section — these articles are in German only.
Also Diode lasers
Your material. Your machine. One hour.
The demo costs nothing and ends without a signature. It ends with you knowing which machine fits what you are planning and which one you can skip.
Booking runs through the official xTool demo system, opens in a new tab.